Valves group
User’s Manual, DU3310103-MRI / rev.3 - 02.05.2019
3-7
3.4 Use
When the CO
2
absorber canister is inserted, the system is
automatically configured in rebreathing modality.
When the CO
2
absorber canister is removed, the system is
automatically configured in non-rebreathing modality.
3.4.1 CO
soda lime absorber canister
• The CO
2
absorber canister is positioned in the upper side of valves group; it can
be easily disconnected by apposite lock lever, this functionality make it
replaceable also during surgical interventions.
• When the CO
2
absorber canister is inserted, the system is automatically
configured in rebreathing modality.
• When the canister is removed, the system is automatically configured in non
rebreathing modality (real open circuit).
• It is possible to insert and remove the canister during interventions. The canister
is available in reusable or pre-loaded disposable versions.