AD.A module
User’s Manual, DU3310103-MRI / rev.3 - 02.05.2019
7-21
7.5 Respiratory physiological parameters [ PRF ]
7.5.1 Ventilation parameters
All the pictures and the examples shown in the present chapter have
the mere purpose of being an example and they do not make any
reference to real clinical cases.
The respiratory physiological parameters can be set manually in
STAND-BY before activating any operative mode.
The system allows to set the default respiratory physiological
parameters in STAND-BY mode suitable for the ventilation of an adult
patient.
WARNING! Risk of injury to the patient
The PRF can be adjusted also during lung ventilator operation, adapting
them to the patient clinical conditions.
To Next Page
Loading...
