Siare Morpheus Series - Page 45

Valves group
3-8 MORPHEUS MRI
Assembling - disassembling of absorber canister (e.g. disposable model)
1. To unpack carefully the CO
2
absorber
canister.
2. Shake the absorber canister
(disposable model) in order to separate
the soda lime granules.
3. Remove the seal from absorber
canister (disposable model).
4. Insert the absorber canister in the
apposite groove (opposite side of the
“PUSH” lever)
5. Press the apposite lock “PUSH” lever
(unlock).
6. Press down and release the apposite
lock lever (unlock).
7. Push (lever side) down the absorber
canister
8. Release the lock “PUSH” lever (unlock)
• To take off the absorber canister, press
the “PUSH” lever.
• Pull up (lever side) the CO
2
absorber
canister
• Extract from the apposite groove
(opposite to “PUSH” lever side).