AD.A module
User’s Manual, DU3310103-MRI / rev.3 - 02.05.2019
5-3
After displays and leds checking the ventilator proceeds with “ SELF
TEST “ and displays:
• tESt (execution of electronic test phase)
• 2.5 (release of installed software)
• 0006 (operation hours)
At the end of “ SELF TEST “ the ventilator automatically pass to the
STAND-BY view.
WARNING! Risk of injury for the patient.
If at the end of “ SELF TEST “ the ventilator automatically DOES NOT
pass to STAND-BY view:
• consult the chapters 8 and 9 to solve the problem;
• consult the service manual;
• if the malfunctioning is not solved, contact the nearest Siare
Service Centre or authorized by Siare.
To Next Page
Loading...
