Siare Morpheus Series - Page 77

AD.A module
5-16 MORPHEUS MRI
•
Turn clockwise (counter-clockwise) to increase (decrease) the
parameter value [ Vt ].
• The parameter value (
0400
) is flashing.
•
Press the knob to confirm the selected value.
•
The parameter value ( 0400 ) DOESN’T flash.
Use of encoder
• After having selected the parameter to be
modified, press the key alongside the
parameter.
• Turn the encoder clockwise (counter-
clockwise) to increase (decrease) the
parameter value; press the encoder to
confirm the value.