TROUBLESHOOTING 5
8015078/145N/2019-05 -24 | SICK STEGMANN OPERATING INSTRUCTIONS | AFS60/AFM60 PROFINET
57
Subject to change without notice
Warning in relation to the speed:
Current measured value outside of the minimum
or maximum limit
Position error:
Error on the calculation of the amplitude values
Sin + Cos in the multiturn stage
Warning in relation to the supply voltage:
Current measured value outside of the minimum
or maximum limit
Warning, sensor LED current critical:
Current measured value outside of the minimum
or maximum limit
Warning in relation to the temperature:
Current measured value outside of the minimum
or maximum limit
Warning:
General start-up error at power-on
Table 44: Subindex .0 – Sensor status (S_STAT-A)