SICK EtherNet/IP microScan3 - Page 173

Interfaces
T
able 43: Interfaces
 microScan3 Core – Ether‐
Ne
t/IP™
microScan3 Pro – Ether‐
Net/IP™
Safety outputs via network
Quantity
Devices with a max. protec‐
t
ive field range of 4.0m
4 8
Devices with a max. protec‐
tive field range of 5.5m
4 8
Devices with a max. protec‐
tive field range of 9.0m
4
Duration of OFF state ≥ 80ms ≥80ms
Automated restart after 2s … 60s (can be configured) 2s to 60s (can be configured)
Voltage supply
Connection type Male connector, M12, 4-pin, A-coding
Length of cable (power supply unit tolerance ±5%)
Length of cable with
0.25mm² c
onductor cross
section
≤ 100m ≤100m
USB
Connection type USB 2.0 mini-B (female connector)
Transmission rate ≤ 12Mbit/s ≤12Mbit/s
Length of cable ≤ 5m ≤5m
EtherNet/IP
Connection type M12 female connector, 4-pin, D-coded
Transmission rate ≤100Mbit/s
Length of cable ≤100m
Services
1)
•
E
therNet/IP™ CIP Safety™
•
CoLa2 (configuration and diagnostics with the Safety
Designer)
•
Data output
•
DHCP
•
SNMP
•
SNTP (client and server)
Supported protocol versions
•
Common Industrial Protocol: The CIP Networks Library Vol‐
ume 1
•
EtherNet/IP™: The CIP Networks Library Volume 2
•
CIP Safety™: The CIP Networks Library Volume 5
1)
The SNTP server provides the time since the device was switched on.
Electrical data
T
able 44: Electrical data
 microScan3 Core – Ether‐
Ne
t/IP™
microScan3 Pro – Ether‐
Net/IP™
Operating data
Protection class III (IEC 61140) III (IEC61140)
Supply voltage V
S
24VDC (16.8V … 30VDC)
(SEL
V/PELV)
1)
24VDC (16.8V to 30VDC)
(SELV/PELV)
1)
TECHNICAL DATA 13
8020200/1NTM/2024-06-03 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™
173
Subject to change without notice