SICK EtherNet/IP microScan3 - Page 174

 microScan3 Core – Ether‐
Ne
t/IP™
microScan3 Pro – Ether‐
Net/IP™
Residual ripple ±5%
2)
Start-up current at 24V ≤3A
Current consumption at 24V
Operation ≤ 0.45A (typ. 0.3A) ≤0.45A (typ. 0.3A)
Sleep mode Typ. 0.29A
Power consumption
Operation ≤11W (typ. 7.2W)
Sleep mode Typ. 7W
Power-up delay ≤ 45s (typ. 20s) ≤45s (typ. 20s)
1)
The supply voltage must be within the specified range at all times. It must not fall below the lower limit,
e
ven for a brief period.
The power supply unit must be able to bridge a brief power failure of 20ms as specified in
IEC60204-1.Suitable power supply units are available as accessories from SICK.
2)
The voltage level must not fall below the specified minimum voltage.
Mechanical data
T
able 45: Mechanical data
 microScan3 Core – Ether‐
Ne
t/IP™
microScan3 Pro – Ether‐
Net/IP™
Dimensions (without system
plug, W × H × D)
112mm × 150.7mm × 111.1mm
Weight (including system
plu
g)
1.45kg
Housingmaterial Aluminum
Housing color RAL 9005 (black) and RAL 1021 (colza yellow)
Optics cover material Polycarbonate
Optics cover surface Outside with scratch-resistant coating
Ambient data
T
able 46: Ambient data
 microScan3 Core – Ether‐
Net/IP™
microScan3 Pro – Ether‐
Net/IP™
Enclosure rating
1)
IP65 (IEC 60529) IP65 (IEC60529)
Ambient light immunity ≤40klx
2)
Ambient operating tempera‐
t
ure
–10°C … 50°C –10°C to 50°C
Storage temperature –25°C … 70°C –25°C to 70°C
Air humidity ≤95%, non-condensing
3)
≤95%, non-condensing
4)
Height above sea level during
opera
tion
≤ 2300m
Vibration resistance
5)
Standards
•
IE
C 60068-2-6
•
IEC 60068-2-64
•
IEC 60721-3-5
•
IEC TR 60721-4-3
•
IEC 61496-1
•
IEC 61496-3
13 TECHNICAL DATA
174
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™ 8020200/1NTM/2024-06-03 | SICK
Subject to change without notice