SICK FLOWSIC600 User Manual

Installation
24 FLOWSIC600 · Operating Instructions · 8010458 V2.0 · © SICK MAIHAK GmbH
3.1
General Notes
3.1.1 Delivery
The FLOWSIC600 is delivered in a pre-assembled condition in a sturdy package. When
unpacking the device, check for possible damage in transit. Pay particular attention to the
interior of the meter body, any visible transducer components and the sealing surfaces on
the flanges. Any damage must be documented and reported to the manufacturer
immediately.
Also check the shipment to ensure all components are included. The standard meter
shipment is comprised of:
b FLOWSIC600 measuring system (meter body with signal-processing unit and
transducers)
b MEPAFLOW600 CBM control and configuration software
b Operating instructions
b Manufacturer Data Report (MDR)
Figure 4 FLOWSIC600 labels and marks
NOTICE:
To guarantee safe and reliable operation of the measuring equipment, make
sure the actual site conditions match the information provided on the labels on
the meter body and SPU (see Fig. 5.1).
Type plate on the meter body
Flange dimensions
Main type plate on
the SPU
Main type plate, see
Drawing no. 902153 and
no. 902147 on product
CD

SICK FLOWSIC600 Specifications

General

Brand	SICK
Model	FLOWSIC600
Category	Measuring Instruments
Language	English