SICK FLOWSIC600

Troubleshooting
76 FLOWSIC600 · Operating Instructions · 8010458 V2.0 · © SICK MAIHAK GmbH
6.2.3 Battery Lifetime / Capacity
Because the FLOWSIC600 has no regular maintenance cycle, after 8.5 years, a message
will be generated automatically, which forces the operator to change the battery (
→ Figure 34
and
→ Figure 35). The procedure to change the battery is decribed in the Service Manual.
Figure 34 Flashing message on the LCD display, prompts to change the battery
Figure 35 “Battery Lifespan” status bit in “Meter Status” window
INFORMATION 1030
LifeSpan Battery
“Battery
Lifespan”
status bit