SICK FLOWSIC600 User Manual

FLOWSIC600 · Operating Instructions · 8010458 V 2.0 · © SICK MAIHAK GmbH 49
Commissioning
4.3.4
Online Connection: Direct Serial
b Choose a meter and click the “Direct serial” to establish a serial connection to a meter
which is connected to the PC.
b Specify the appropriate connection settings in the Connection settings window
(
→ Figure 18) and click the “Connect” button to establish an online connection to the
meter. If the connection fails, see
→ pg.78, 6.4 for troubleshooting.
Figure 18 Connection settings
b After the connection has been established, MEPAFLOW600 CBM displays the start
page (can be specified in the Program settings) and the current readings from the
meter.
The parameters shown in → Figure 18 are default values - except for the serial
COM port which has to be individually configured.

SICK FLOWSIC600 Specifications

General

Brand	SICK
Model	FLOWSIC600
Category	Measuring Instruments
Language	English