Product Description
20 FLOWSIC600 · Operating Instructions · 8010458 V2.0 · © SICK MAIHAK GmbH
2.3
MEPAFLOW600 CBM
Most data provided by the FLOWSIC600 (like readings, logbook entries and parameters)
can be accessed via the LCD display of the meter. However, the MEPAFLOW600 CBM
software provides a more user friendly access to diagnostic, configuration and
measurement data of the flow meter.
2.3.1 Software Installation
System requirements
● Microsoft Windows 2000/XP/Vista (later MEPAFLOW600 CBM versions will support
Windows 7 or higher)
● Min. 1 GHz CPU
● Min. 512 MB RAM
● USB- or serial interface
● Screen resolution min. 1024 x 768 pixel (optimal display resolution 1280 x 1024 pixel)
Compatibility
MEPAFLOW600 CBM can be used for all firmware and hardware versions of the
FLOWSIC600. The availability of the software features depend on the firmware version of
the connected FLOWSIC600.
Installation
A product CD containing the MEPAFLOW600 CBM software is included with the
FLOWSIC600 when it is delivered. Insert the product CD into your CD-ROM drive to install
the software. Start the file ‘FLOWSIC600_R_CD.exe‘ to install the software.
Download from www.flowsic600.com
MEPAFLOW600 CBM can be downloaded free of charge from the www.flowsic600.com
website. Select the Software tab and follow the download instructions.
To Next Page
Loading...
