63
8012704/YHS4/V2-0/2016-10 | SICK OPERATING INSTRUCTIONS | GM32
Subject to change without notice
SHUTDOWN 8
8.2 Storage
1 Clean the outside of all housings and all other components including the purge air unit
with damp cleaning cloths. A mild cleaning agent can be used.
2 Check the desiccant cartridges and replace, if required, see “Checking and replacing the
desiccant cartridges”, page 50).
3 Protect the openings of the SR-unit and the reflector unit from atmospheric influences
(preferably with the transport safety devices, see “Transport safety devices”, page 29).
4 Pack the GM32 for storage or transport (preferably in the original packing).
5 Store the GM32 in a dry, clean room.
8.3 Environmentally compatible disposal/recycling
The GM32 can be disposed off as industrial waste.
The following subassemblies could contain substances that have to be disposed of sepa-
rately:
● Electronics: Capacitors, rechargeable batteries, batteries.
● Display: Liquid of LC display.
▸ Observe relevant local conditions for disposal of industrial waste.
To Next Page
Loading...
Need help?
General
