8
8012704/YHS4/V2-0/2016-10 | SICKOPERATING INSTRUCTIONS | GM32
Subject to change without notice
1 ABOUT THIS DOCUMENT
1.4 Product identification
1.5 Responsibility of user
Designated users
The GM32 may be operated by competent persons only who, based on their device-specific
training and knowledge of the device as well as knowledge of the relevant regulations, can
assess the tasks given and recognize the dangers involved.
Correct use
▸ Use the device only as described in these Operating Instructions.
The manufacturer bears no responsibility for any other use.
▸ Perform the specified maintenance work.
!▸
Do not remove, add or modify any components to or on the device unless described and
specified in the official manufacturer information.
Otherwise:
– Any warranty by the manufacturer becomes void.
– The device could become dangerous.
Special local conditions
▸ Follow all local laws, regulations and company-internal operating directives applicable at
the installation location.
Retention of documents
These Operating Instructions:
▸ Must be available for reference.
▸ Must be passed on to new owners.
1.6 Additional documentation/information
▸ Pay attention to the supplied documents.
Additional instructions
The following documents are applicable in addition to these Operating Instructions:
● Technical Information GM32 (option)
● Operating Instructions, Purge Air Supply SLV4
● Operating Instructions, “Modular I/O System” (option)
● Final inspection record
● CD-ROM with SOPAS ET
Product name GM32
Product variant Cross Duct version
Manufacturer
SICK AG · Erwin-Sick-Str. 1
D-79183 Waldkirch · Germany
Location of type plates
Sender/receiver unit: On the right side and on the intermediate enclo-
sure
Connection unit: On the right side and inside
On the purge air fixture: On the tube
On the reflector
To Next Page
Loading...
Need help?
General
