OPERATING INSTRUCTIONS | LFP CUBIC 8019918/ZJA6 / 2017-07-20 | SICK AG
Subject to change without notice
10
2 SAFETY INFORMATION
2.7 General safety notes
• Read the operating instructions prior to commissioning.
• These operating instructions are valid for devices with a rmware version higher
than V4.00.
• The LFP is not a safety component under the EU Machinery Directive.
• Observe national safety and work safety regulations.
• Wiring work and the opening and closing of electrical connections may only be
carried out when the power is switched o.
• The radiated power is far lower than that from telecommunication equipment.
According to current scientic research, the operation of this device can be
classied as safe and nonhazardous.
2.8 Repairs
Repair work on the sensor may be performed only by qualied and authorized
personnel from SICK AG. Interruptions or modications to the sensor on the part
of the customer will invalidate any warranty claims against SICK AG.
To Next Page
Loading...
Need help?
General
