OPERATING INSTRUCTIONS | LFP CUBIC 8019918 /ZJA6/ 2017-07-20 | SICK AG
Subject to change without notice
19
5MOUNTING
5.3.2 Shortening the rope probe
1 2 mm hexagon screw
2 Loosen the setscrews (3x)
3 Rope weight
4 New probe length
5 Shift the rope weight to the desired length
2 Setscrews* (tighten according to desired length 1.5 Nm, 3x)
*It is recommended that the setscrews be secured with a thread-locking lacquer