SICK LFP CUBIC

OPERATING INSTRUCTIONS | LFP CUBIC 8019918 /ZJA6/ 2017-07-20 | SICK AG
Subject to change without notice
27
7COMMISSIONING
Note:
• Measurement deviation can be higher.
• Signal quality 1 and 2 are not counted.
• The sensor automatically quits expert mode after 5 minutes of inactivity on
the display.
• Conguration (foam teach) does not take place in the following processes:
• Changing the probe length
• Changing the measuring mode
• Changing the teach-in depth
• Performing AutCal
If problems occur during commissioning, see “11 Troubleshooting”.