12 MCS100FT · Operating Instructions · 8011893 V2-1 · © SICK AG
Product Description
Subject to change without notice
2.1 Product identification
Type plate
The type plate is located on the top of the right cabinet side.
2.2 Features of the MCS100FT
Fig. 1 Extractive measuring system MCS100FT (components only examples)
The MCS100FT is a multicomponent analysis system for continuous flue gas monitoring of
industrial combustion plants (emission measuring system).
The MCS100FT operates in extractive mode, i.e. the gas is withdrawn from the gas duct
using a gas sampling probe and fed to the analysis system via a (heated) sample gas line.
The acquired measured values are computed internally (cross-sensitivity compensation,
scaling (pressure, temperature), conversion to “dry flue gas” etc.).
It is possible that your MCS100FT has a different configuration to that
described in this manual.
Refer to the System Documentation (
p. 9, §1.4) delivered with your
MCS100FT for the individual configuration of your system.
Ethernet
Digital/analog
interfaces
To Next Page
Loading...
