SICK MCS100FT - MCS100 FT Diagnosis Functions

Operation
MCS100FT · Operating Instructions · 8011893 V2-1 · © SICK AG 61
Subject to change without notice
5.7.8 Diagnosis
Menu: MCS100FT/Diagnosis
5.7.8.1 Device information
Menu: MCS100FT/Diagnosis/Device Information
Basic settings of MCS100FT.
Designation Remark
Serial No. Serial number. Preset.
Location Name The name entered here is shown in the menus to identify the MCS100FT
(Example: “MCS100FT stack1”).
IP configuration allowed Checkmark: The IP address can be changed via SOPAS ET.
MCS100FT Firmware Ver-
sion
Firmware version of the MCS100FT.
Get CPU Time Read out internal time of the MCS100FT.
CPU Time Display of time read.
IR Cube Type Type of interferometer. Preset.
IR Cube Serial No. Serial number of interferometer. Preset.
Device Information
Logbook
Driftcheck (QAL3) with span gas
Driftcheck (QAL3) without span gas
Energy values
Sensor Values
/MCS100FT/Diagnosis
SCU
MCS100FT
Measure
 p. 61, §5.7.8.1
 p. 62, §5.7.8.2
 p. 66, §5.7.8.3
 p. 66, §5.7.8.4
 p. 66, §5.7.8.5
 p. 67, §5.7.8.6
/MCS100FT/Diagnosis/Device Information
SCU
MCS100FT
Measure
00000000Serial No.
00000000
Location Name
IP configuration allowed
MCS100FT Firmware Version
Get CPU Time
00000000
CPU Time
IR Cube Type
Matrix-M
IR Cube Serial No.