Operation
MCS100FT · Operating Instructions · 8011893 V2-1 · © SICK AG 39
Subject to change without notice
5.6 “System Control Unit” (SCU) menus
5.6.1 Menu tree
5.6.2 Menu selection
5.6.3 Login (user levels)
Menu: System Control Unit/Login
Password
5.6.4 Upload all Parameters from Device
Menu: System Control Unit/Upload all Parameters from Device
The current parameters from the SCU memory are loaded to the SCU operating unit.
No further prompts are displayed, the parameters are loaded when the menu item is
touched.
Complete menu tree
p. 36, §5.5.2
Equivalent to the menu for the MCS100FT: MCS100FT/Login
p. 51, §5.7.3
Userlevel Designation Allowed actions Password
12
1
The password cannot be changed.
2
Capital letters
1 None View measured values and parameters No password
3 Authorized user Start actions and change parameters HIDE
The menus of both user levels are described in this Manual.
Menus not allowed for a user level are not displayed.
If it is possible that parameters have been changed in the SCU via the Ethernet
(e.g. via SOPAS ET):
Perform “Upload all Parameters from Device” before changing parameters.
Login
Upload all Parameters from Device
Start Screen
Measuring
Diagnosis
Parameter
Maintenance
/System Control Unit/
SCU
MCS100FT
Measure
p. 39, §5.6.3
p. 39, §5.6.4
p. 40, §5.6.6
p. 40, §5.6.6
p. 43, §5.6.7
“SCU” Technical Information manual
p. 45, §5.6.9
To Next Page
Loading...
