74 MCS100FT · Operating Instructions · 8011893 V2-1 · © SICK AG
Operation
Subject to change without notice
5.8.6 Adjustment
Menu: FID-100FT/Adjustment
Select desired adjustment:
● Zero and responsivity (span point)
● Only zero point
● Only responsivity (span point)
Start automatic adjustment.
Designation Remark
Adjustment blocked LED on: Adjustment blocked by MCS100FT internal
sequences. Wait until the LED goes off.
Zero and Responsivity
Zero
Responsivity
Start: Select “Start”
Terminate: Select “Stop”
Process Current device state
Execute Execute selection
Zero and Responsivity
Zero
Responsivity
/FID-100FT/Adjustment
SCU
FID-100FT
Measure
Adjustment blocked
Zero and Responsivity Stop
Process
Execute
Measuring
To Next Page
Loading...
