7SR210 & 7SR220 Configuration Guide
Unrestricted Page 10 of 14 © 2018 Siemens Protection Devices Limited
2.1.2 STANDARD REAR RS485 CONNECTION
Figure 2.1.2-1 Standard rear RS485 connection to a PC
2.1.3 OPTIONAL REAR FIBRE OPTIC CONNECTION
Figure 2.1.3-1 Additional (Optional) rear fibre optic connection to a PC
Sigma devices have a 25 pin female D connector with the following pin out.
2 Transmit Data
3 Received Data
4 Request to Send
5 Clear to Send
6 Data set ready
7 Signal Ground
8 Received Line Signal Detector
20 Data Terminal Ready