Siemens Argus 7SR21 - Fault Storage; Event Storage; Energy Storage

7SR220 Settings Guide
Unrestricted Page 104 of 107 © 2013 Siemens Protection Devices Limited
Description Range Default
Gn SEF/REF Trig Storage
As Above
Combination of ( 51SEF-1, 51SEF-
2, 51SEF-3, 51SEF-4, 50SEF-1,
50SEF-2, 50SEF-3, 50SEF-4, 64H
)
51SEF-1,
51SEF-2,
51SEF-3,
51SEF-4,
50SEF-1,
50SEF-2,
50SEF-3,
50SEF-4, 64H
Gn Misc Current Storage
As Above
Combination of ( 46IT, 46DT, 37-1,
37-2, 49 Trip, 49 Alarm, 37G-1,
37G-2, 37SEF-1, 37SEF-2 )
----------
Gn Voltage Trig Storage
As Above
Combination of ( 27/59-1, 27/59-2,
27/59-3, 27/59-4, Vx 27/59, 47-1,
47-2, 59NIT, 59NDT )
---------
Gn Freq Trig Storage
As Above
Combination of ( 81-1, 81-2, 81-3,
81-4, 81-5, 81-6 )
------
Gn AFD Trig Storage
As Above
Combination of ( AFD-1, AFD-2,
AFD-3, AFD-4, AFD-5, AFD-6)
------
Pre-trigger Storage
Select Percentage of waveform record stored before the fault
is triggered
10, 20, 30, 40, 50, 60, 70, 80, 90 20 %
Record Duration
Select waveform record duration
10 Rec x 1 Sec, 5 Rec x 2 Sec, 2
Rec x 5 Sec, 1 Rec x 10 Sec
10 Rec x 1 Sec
Trigger Waveform
Trigger waveform storage
Clear Waveforms
Clear all stored waveform records
3.15.3. Fault Storage
Description Range Default
Gn Max Fault Rec Time
Maximum time Fault record information will be stored and
classed as same fault
0, 1 ... 59900, 60000 2000 ms
Clear Faults
Clear all stored fault records
3.15.4. Event Storage
Description Range Default
Clear Events
Clear all stored event records
3.15.5. Energy Storage
Description Range Default
Gn Active Exp Energy Unit 1kWh, 10kWh, 100kWh, 1MWh,
10MWh, 100MWh
10 kWh
Gn Active Imp Energy Unit 1kWh, 10kWh, 100kWh, 1MWh,
10MWh, 100MWh
10 kWh
Gn Reactive Exp Energy Unit 1kVArh, 10kVArh, 100kVArh,
1MVArh, 10MVArh, 100MVArh
10 kVArh