7SR210 Settings Guide
Unrestricted Page 2 of 61 © 2018 Siemens Protection Devices Limited
Document Release History
This document is issue 2017/12. The list of revisions up to and including this issue is: -
2011/05 First issue
2013/01 Typographical revisions and added data. Updated in line with software release.
2014/06 Typographical revisions and added data. Updated in line with software release.
2015/06 Typographical revisions and added data. Updated in line with software release.
2016/02 Typographical revisions and added data. Updated in line with software release.
2016/11 Typographical revisions and formatting
2017/08 Typographical revisions and added data. Updated in line with software release.
2017/12 Typographical revisions and added data.
Software Revision History
2011/05 2435H85008R7a-7a (7SR210) First Release
2013/01 2435H85008R7c-7b (7SR210)
Introduced journaling file system.
Added 61850 logical nodes for CB Counters, metering, 50BF,
46BC, 81HBL2 and line check.
Added Line Check on non-AR devices.
Added 74CCS Close Circuit Supervision.
2014/06 2435H85008R7f-7d (7SR210)
Fault data transmission over IEC 60870-5-103.
Additional communications data, control features, meters.
2015/06 2435H85008R8a-7f (7SR210)
Added Arc Flash Detector. Over current TM Setting Range
extended.
2016/02
2435H85008R8b-7f (7SR210)
2435H85009R8b-7f (7SR220)
EN100+ Compatibility.
2017/08 2435H85008R8e-8a (7SR210)
2435H85009R8e-8a (7SR220)
Added 32 Directional Power, 32S Sensitive Power, 55 Power
Factor, 81HLB5 Overfluxing. Increased I/O.
To Next Page
Loading...
