7SR210 Settings Guide
Unrestricted ©2018 Siemens Protection Devices Limited Page 39 of 61
Description Range Default
Remote Mode
Selects which inputs will put the relay into Remote Mode
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Local Or Remote Mode
Selects which inputs will put the relay into Local Or Remote
Mode
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Clock Sync.
Selects which input is used to synchronise the real time clock
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Reset LEDs & O/Ps
Selects which inputs will reset the latched LEDs and binary
outputs
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Inverted Inputs
Selects which inputs will be inverted
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, BI10, BI11,
BI12, BI13)
----------------------
-------
Enable In Local
Selects which inputs will be enabled in local mode
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, BI10, BI11,
BI12, BI13)
BI1, BI2, BI3,
BI4, BI5, BI6,
BI7, BI8, BI9,
BI10, BI11, BI12,
BI13
Enable In Remote
Selects which inputs will be enabled in remote mode
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, BI10, BI11,
BI12, BI13)
BI1, BI2, BI3,
BI4, BI5, BI6,
BI7, BI8, BI9,
BI10, BI11, BI12,
BI13
To Next Page
Loading...
