7SR220 Instrumentation Guide
© 2017 Siemens Protection Devices Limited Page 17 of 20
Instrument Description
I Phase B Demand
Max 0.00A
Min 0.00A
Mean 0.00A
Shows the Max, Min and Mean for Phase B.
I Phase C Demand
Max 0.00A
Min 0.00A
Mean 0.00A
Shows the Max, Min and Mean for Phase C.
I Phase Ig Demand
Max 0.00A
Min 0.00A
Mean 0.00A
Shows the Max, Min and Mean for Phase Ig.
Power P 3P Demand
Max 0.00W
Min 0.00W
Mean 0.00W
Shows the Max, Min and Mean for Power P 3P Demand.
Power Q 3P Demand
Max 0.00VAr
Min 0.00VAr
Mean 0.00VAr
Shows the Max, Min and Mean for Power Q 3P Demand.
Power S 3P Demand
Max 0.00VA
Min 0.00VA
Mean 0.00VA
Shows the Max, Min and Mean for Power S 3P Demand.
Frequency Demand
Max 0.000Hz
Min 0.000Hz
Mean 0.000Hz
Shows the Max, Min and Mean for System Frequency Demand.
Power Factor 3P Demand
Max 0.00
Min 0.00
Mean 0.00
Shows the Max, Min and Mean for System Power Factor 3P Demand.
1.15. Binary Input Meters
Instrument Description
--------------------
> to view
--------------------
This is the sub-group that includes all the meters that are associated with the
Binary inputs TEST/RESET ► allows access to this sub-group
BI 1-8 ---- ----
BI 9-9 -
Displays the state of DC binary inputs 1 to 9 (The number of binary inputs may
vary depending on model)
1.16. Binary Output Meters
Instrument Description
--------------------
BINARY OUTPUT METERS
> to view
This is the sub-group that includes all the meters that are associated
with the Binary Outputs TEST/RESET ► allows access to this sub-
group
To Next Page
Loading...
