7SR220 Instrumentation Guide
Page 20 of 20 © 2017 Siemens Protection Devices Limited
Miscellaneous Meters
Instrument Description
--------------------
MISCELLANEOUS METERS
> to view
--------------------
This is the sub-group that includes indication such as the relays time and
date, the amount of fault and waveform records stored in the relay
TEST/RESET ► allows access to this sub-group
Start Alarm
Count 0
Target 100
This meter displays the Start Alarm count.
Hrs In Service Time
Time 0Hrs
This meter displays the amount of time in service
Date 01/01/2000
Time 22:41:44
Waveform Recs 0
Fault Recs 0
This meter displays the Date, Time, Waveform Records and the number of
Fault Records stored in the relay
Event Recs 0
Data Log Recs 0
Settings Group 1
This meter displays the Event Records, Data Log Records and Active
Settings Group number stored in the relay
1.19. Quick Logic Meters
Instrument Description
--------------------
> to view
--------------------
This is the sub-group that includes all the meters that are associated with
QuickLogic. TEST/RESET ► allows access to this sub-group
E 1-8 ---- ----
E 9-16 ---- ----
Shows the state of all the equations
E1 Equation
EQN =0
TMR 0-0 =0
CNT 0-1 =0
Shows the state of an individual equation. EQN shows the equation state.
TMR shows the timer progress and state for the equation. CNT shows the
count progress and state for the equation.
E16 Equation
EQN =0
TMR 0-0 =0
CNT 0-1 =0
Shows the state of an individual equation. EQN shows the equation state.
TMR shows the timer progress and state for the equation. CNT shows the
count progress and state for the equation.
1.20. Fault Locator
Instrument Description
--------------------
> to view
--------------------
This is the sub-group that includes all the meters that are associated
with the Fault Locator TEST/RESET ► allows access to this sub-
group
Distance 0.0%
Impedance 0.0ohms
Reactance 0.0ohms
Displays the Fault Location.
To Next Page
Loading...
