Siemens Clinitek Advantus User Manual

46 Clinitek Advantus Operator’s Guide
Maintenance
5. Remove any paper remaining in the printer:
a. Locate the printer paper release lever.
This lever is colored green and is located on the right of the printer
when looking at the front of the analyzer.
b. Push down on the back of the lever to unlock the roller.
c. Pinch and lift the front of the lever to raise the paper guide.
d. Carefully pull paper through the printer in its normal direction of travel.
Figure 13 Printer Release Lever
6. Obtain a new paper roll.
7. Unroll sufficient paper to feed the printer.
8. Hold the roll just above the printer, with the paper unrolling from
underneath.
9. Push the paper gently under the roller at the back of the printer.
The printer automatically pulls the paper into the printer and behind the
paper guide on the top of the printer.
1
Printer release lever

Siemens Clinitek Advantus Specifications

General

Test Types	Urinalysis
Interface	RS-232, USB
Calibration	Automatic calibration
Measurement Principle	Reflectance photometry
Sample Type	Urine
Power Supply	100-240 VAC, 50/60 Hz
Type	Urine analyzer
Display	Touchscreen
Reagent Type	Test strips
Measurement Parameters	Glucose, Bilirubin, Ketone, Specific Gravity, Blood, pH, Protein, Urobilinogen, Nitrite, Leukocytes