Siemens Clinitek Advantus User Manual

Clinitek Advantus Operator’s Guide 47
Maintenance
10. Set the roll of paper into position.
Figure 14 Feed Paper into the Printer
11. If necessary, feed more paper through the printer cover:
a. Carefully pull sufficient paper through the printer to enable you to feed
it through the printer cover.
b. Ensure the edges of the paper are aligned with the edges of the
printer.
c. Return the printer paper release lever to its locked position by
pressing firmly down on the front of the lever.
12. Set the paper into position behind the printer.
13. Place the front tabs of the cover into their slots.
14. Feed the end of the paper through the opening in the cover.
15. Snap the cover into place.

Siemens Clinitek Advantus Specifications

General

Test Types	Urinalysis
Interface	RS-232, USB
Calibration	Automatic calibration
Measurement Principle	Reflectance photometry
Sample Type	Urine
Power Supply	100-240 VAC, 50/60 Hz
Type	Urine analyzer
Display	Touchscreen
Reagent Type	Test strips
Measurement Parameters	Glucose, Bilirubin, Ketone, Specific Gravity, Blood, pH, Protein, Urobilinogen, Nitrite, Leukocytes