Clinitek Advantus Operator’s Guide 85
System Configuration
Date
Use this option to set the current date.
You can change the Date Format and Separator using Setup Menu 3.
1. Select
Date.
The display changes to show the current date and the numeric keypad.
2. Enter the date.
Select the
Move Left and Move Right keys to move the cursor to the digit to
change and enter the correct number.
The message changes as you move from 1 part of the date to the next,
showing the prompts
Enter day, Enter month, or Enter year. Enter the date
in the order shown on the prompts. Enter the leading 0 where needed.
3. Select Enter.
Time
Use this option to set the current time.
You can change the Time Format and Separator using Setup Menu 3.
1. Select Time.
The display changes to show the current time and the numeric keypad.
2. Enter the time.
Select the
Move Left and Move Right keys to move the cursor to the digit to
change and enter the correct number.
The message changes as you move from 1 part of the time to the next,
showing the prompts
Enter hour and Enter minutes. Enter the leading 0
where needed.
3. If the time format is 12 Hour, select the AM/PM cycle key to set the time to
AM or PM.
The AM/PM cycle key is only active if the time format is 12 Hour.
4. Select
Enter.
To Next Page
Loading...
Need help?
General
