Siemens FC361 Series User Manual

About this document
History of changes
1
A6V10421795_en--_k
11 | 151
Version
Edition date
Brief description
Add ‘Intended use’ sub-chapter in chapter 2.1.
Some minor editorial changes.
f
2016-08-23
Add technical information on output card (4M)
concerning creeping open/short when the output
is configured as 'RT Fault' in chapter 5.11.4.
e
2016-08-18
Add technical information on output card (4M)
concerning creeping open/short in chapter 3.4.2
and 5.11.4.
d
2016-07-22
Completely update the document.
c
2016-04-08
Add RS485/RS232 communication parameters
in chapter 5.11.5.
Change name of ‘FC360 Tool’ to ‘FC360 Panel
Configurator’.
Change name of ‘FC360 Editor’ to ‘FC360
Desktop Editor 2.0’.
Change password of access level 3.1 in chapter
6.1.
Add information of updating firmware of
FT2010/FT2011/FDUL221 in chapter 9.7.
b
2016-02-23
Add sticker information in chapter 5.2.
Add description to quit replace mode in chapter
8.3.4.3.
Add how to adjust brightness in chapter 11.2.
Update information in chapter 3.4.2 and chapter
5.8 about the total output current of configurable
IOs and Aux power output is max. 0.2 A.
Add access level 3.1 in chapter 6.1.
Add action of P2 line overload in chapter 11.2.
Add ‘Shielded cable is required.’ for RS485
application in chapter 5.11.5.
a
2015-06-08
First version
The table below shows the published language versions and country variants with
the corresponding modification index:
Modification index
en_--
de_--
fr_--
it_--
es_--
k
X
X
X
X
X
j
X
-
-
-
-
i
X
-
-
-
-
h
X
X
X
X
X
g
X
X
X
X
X
f
X
-
-
X
-
e
X
-
-
-
-
d
X
-
-
X
-
c
X
-
-
-
-
b
X
-
-
-
-
a
X
-
-
-
-

Siemens FC361 Series Specifications

General

Brand	Siemens
Model	FC361 Series
Category	Control Panel
Language	English