8.4 Operations under access level 1
Functions in the sub-chapters are available without a password.
8.4.1 Viewing system status
The fire detection system evaluates received signals and indicates them as events.
There are the following event categories:
● Alarm
● Fault
● Technical
● Isolation
● Test
● Information
The 'System status' function is used to display all pending events.
1. Press on the keypad.
The 'System status' window is open.
2. Select 'System status' and press .
The 'System status' window is open. All event types are listed with numbers
of pending events.
3. Select one event type and press .
All pending events of the selected type are indicated. You can check each of
the events by pressing / .
The picture below shows the details of an event as an example.
To Next Page
Loading...
