EasyManua.ls Logo

Siemens FC361 Series - Safety; Safety instructions

Siemens FC361 Series
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
Intended use
2
A6V10421795_en--_k
13 | 151
2 Safety
2.1 Intended use
The panel is intended to be mounted in a building to detect, evaluate and alarm in
the event of fire, together with C-NET detector line.
2.2 Safety instructions
The safety notices must be observed in order to protect people and property.
The safety notices in this document contain the following elements:
Symbol for danger
Signal word
Nature and origin of the danger
Consequences if the danger occurs
Measures or prohibitions for danger avoidance
Symbol for danger
This is the symbol for danger. It warns of risks of injury.
Follow all measures identified by this symbol to avoid injury or death.
Additional danger symbols
These symbols indicate general dangers, the type of danger or possible
consequences, measures and prohibitions, examples of which are shown in the
following table:
General danger
Explosive atmosphere
Voltage/electric shock
Laser light
Battery
Heat
Signal word
The signal word classifies the danger as defined in the following table:
Signal word
Danger level
DANGER
DANGER identifies a dangerous situation, which will result
directly in death or serious injury if you do not avoid this
situation.
WARNING
WARNING identifies a dangerous situation, which may
result in death or serious injury if you do not avoid this
situation.
CAUTION
CAUTION identifies a dangerous situation, which could
result in slight to moderately serious injury if you do not
avoid this situation.
NOTICE
NOTICE identifies possible damage to property that may
result from non-observance.

Table of Contents

Related product manuals