9.4.5 Viewing devices and type A dependencies
9.4.5.1 Viewing a device in a zone
The 'View zone / device' function is used to view details of a device in a specific
zone.
1. Press on the keypad.
The 'Main menu' window is open.
2. Select 'Engineering' and press .
The 'Engineering' window is open.
3. Select 'Detector line' and press .
The 'Detector line' window is open.
4. Select 'View' and press .
The 'View' window is open.
5. Select 'View zone / device' and press .
A list of all zone numbers is displayed.
6. Select one zone number and press .
A list of all device numbers is displayed.
7. Select one device number and press .
A list of all devices sharing the same device number is displayed. Normally
each device has a unique device number, but it might encounter the
situation that several devices share the same device number in order for
functions like DAR to work properly.
8. Select one desired device and press .
The device details are displayed as follows.
Zone numbers and device numbers are defined in FC360 Panel Configurator. If
zone and device texts are defined in the tool as well, they are displayed together
with zone numbers and device numbers in Step 5 and Step 7. See document
A6V10450595 for more details.
To Next Page
Loading...
