9.4.5.2 Viewing a single device on a detector line
The 'View element' function is used to view details of a single device on a
↑ detector line.
1. Press on the keypad.
The 'Main menu' window is open.
2. Select 'Engineering' and press .
The 'Engineering' window is open.
3. Select 'Detector line' and press .
The 'Detector line' window is open.
4. Select 'View' and press .
The 'View' window is open.
5. Select 'View element' and press .
A list of all lines is displayed.
6. Select one desired detector line and press .
A list of all devices on the line is displayed.
7. Select one desired device and press .
The device details are displayed as follows.
To Next Page
Loading...
