Siemens FC361 Series - Logging out of the Current Access Level

Operation
Operations under access level 2
8
A6V10421795_en--_k
85 | 151
8.5.4 Logging out of the current access level
The 'Logout' function returns to access level 1 from access level 2 or 3.
1. Press on the keypad. The 'Main menu' window is open.
Main menu L2
1 - System status
2 - Operation
3 - Event memory
4 - Login
5 - Lamp test
7 - Logout
2. Select 'Logout' and press . A confirmation window is open.
Do you want to log out?
Yes (OK) or No (C)
3. Press to confirm. The panel returns to access level 1.
The panel automatically logs out and returns to access level 1 if no action is taken
within 5 minutes. However, if a digital input on the panel mainboard is used to
enable 'Access level 2', the automatic logout returns to access level 2 from a
higher access level or stays in level 2.