Siemens FC361 Series - System description

System description
System overview
4
A6V10421795_en--_k
19 | 151
4 System description
4.1 System overview
The panel is a compact panel with an integrated operating unit for processing
signals from FD720 and FD360 devices. See list of compatibility
(document A6V10882301) in chapter 'Applicable documents [➙ 9]'.
The panel is operated as a standalone fire control panel.
The panel supports operation of the ↑ C-NET ↑ detector line in a ↑ loop or ↑ stub.
Automatic fire detectors (e.g. smoke and heat detectors), manual call points, alarm
devices, voice alarm devices, I/O modules and other ↑ C-NET devices are
connected to the C-NET detector line(s).
The picture below shows the FC360 system overview.
Fig. 1: Overview of FC360 system
1
FC360 fire control panel
2
C-NET detector line. FC361-xx supports one detector line while FC362-xx
supports two.
3
Alarm devices, RT fire, RT fault, Fire control, configurable IOs
4
FC360 configuration tools (i.e.,'FC360 Panel Configurator', 'FC360 Desktop
Editor 2.0') for configuration via PC
5
Third-party devices such as DMS, ESPA and event printer