Siemens FC361 Series - Engineering

Engineering
Setting date & time
9
A6V10421795_en--_k
87 | 151
9 Engineering
All 'Engineering' functions request access level 3 password.
9.1 Setting date & time
The 'Set date & time' function adjusts date and time.
In countries with central European summer time (CEST), the system clock
automatically switches between daylight savings time and regular time.
1. Press on the keypad.
 The 'Main menu' window is open.
2. Select 'Engineering' and press .
 The 'Engineering' window is open.
3. Select 'Set date & time' and press .
 The 'Set date & time' window is open.
4. Enter the correct date and time and confirm with .
 A confirmation dialog window is open.
5. Press to confirm.
 The date and time are set.
The picture below shows the 'Set date & time' window.
Eng. - Set date & time L3