Siemens FC361 Series - Querying Alarm Counter; About

Operation
Operations under access level 1
8
74 | 151
A6V10421795_en--_k
8.4.3 Querying alarm counter
The panel counts all alarm events. The total number of alarm events is displayed
by querying alarm counter.
1. Press on the keypad.
 The 'Main menu' window is open.
2. Select 'Query alarm counter' and press .
 The total number of alarm events is indicated.
The picture below shows the alarm counter.
Query alarm counter L1
Alarm count: 10
8.4.4 About
The 'About' function displays software version for:
● Panel
● FC360 Panel Configurator
● Output card (4M)
1
1
If installed
1. Press on the keypad.
 The 'Main menu' window is open.
2. Select 'About' and press .
 The following information is indicated.
About L1
FC362
IP : 192.168.251.100
FW version: 02.00.09(39)
Config. version: 02.00.11(25)