Alarm Verification Concept
Electro Magnetic Compatibility
1.4 History of changes
The reference document's version applies to all languages into which the reference
document is translated.
The first edition of a language version or a country variant may, for example, be
version 'd' instead of 'a' if the reference document is already this version.
The table below shows this document’s history of changes:
Some minor editorial changes.
Add DAR use case.
Add descriptions of the 'Door holder' function.
Add synchronization descriptions of voice alarm
devices.
Add Chapter 3.
Add RS485 communication parameters in
Chapter 6.11.5.
Change LED indicators (16 zones) to LED
indicators (32 zones) throughout the whole
document.
Add information about FC362-xx to the whole
document.
Remove unsupported functions such as device
deletion and brightness adjustment.
Change terms, e.g., change section to zone.
Add a note to the reset key in chapter 5.10.
Add information on mainboard FCM3601-Z1 and
door incl. PMI FHD3601-Z1 in chapter 5.12 and
chapter 12.
Change default setting of relay 3 in chapters 5.9
and 5.5.
To Next Page
Loading...
Need help?
General
