Siemens FC361 Series - Page 143

Appendix G: Default settings for panel/devices
21
A6V10421795_en--_k
143 | 151
Items
Default settings
Additional delay alarm
1
Automatically adjust clock for daylight saving time
Yes
Panel display style
Style 1
Floor repeater display style
Style 1
Enable DHCP server
Yes
Panel IP address
192.168.251.100
Subnet mask
255.255.255.0
Default gateway
192.168.251.19
1
The ‘Glass broken’ message from an activated MCP disappears automatically
15 seconds after reset (i.e. replacement of glass).
The default value of each item is based on the country selection.
Detector parameters
Devices
Sensitivity
Detection method
↑ Parameter set
OP360
-
-
-
OP720
01: Standard
-
-
HI360
-
02: A2R
-
HI720
-
02: A2R
-
HI722
-
01: A2S
-
OH360
-
-
-
OH720
01: Robust
-
-
OOH740
-
-
04 (OOT):
Balanced
OOHC740
(fire sensor)
-
-
10 (OOT):
Balanced CO
OOHC740
(CO sensor)
-
-
-
FDF241-9
01: Robust
-
-
FDL241-9
02: Standard
-
-
The default settings of the following parameters for the devices above are the
same:
● Attach AI: Yes
● Activation of external AI: By the element
● AVC function: ON
● Type A function: OFF
● Latched: Yes