Siemens FC361 Series - Page 65

Function overview
Operating menu overview
7
A6V10421795_en--_k
65 | 151
Main menu
Sub menu
Description
Access
level
Sectio
n/Link
● Configures the system automatically with
default settings.
● Views zone/device/element
configurations and devices that have the
typeA function enabled.
● Locates an element (single device) or
devices in a zone or detector line.
● Calibrates C-NET detector line and views
calibration reports.
4 - Calibrate 4M card line
Calibrates the output card (4M) to get the
resistance.
3
Section
9.5
[➙ 105]
5 - Alarm counter reset
Sets the alarm counter to ‘0’.
3
Section
9.6
[➙ 106]
6 - Factory reset
Resets the system to factory settings.
3
Section
9.7
[➙ 106]
7. Logout
-
Logs out from the current access level.
2, 3
Section
8.5.4
[➙ 85]
8. Query alarm
counter
-
Queries alarm counters.
1, 2, 3
Section
8.4.3
[➙ 74]
9. About
-
Displays software versions of the fire control
panel, configuration tool and output card
(4M).
1, 2, 3
Section
8.4.4
[➙ 74]