Siemens MCP 398C Configuration Manual

Result
The
general station description files are installed, and then the SINUMERIK I/O in the hardware
catalog displayed in the appropriate folders:
● SINUMERIK I/O for PROFINET IO: "Further field devices > PROFINET IO > I/O > SIEMENS
AG > SINUMERIK"
● SINUMERIK I/O for PROFIBUS DP: "Further field devices > PROFIBUS DP > NC/RC >
SIEMENS AG > MOTION CONTROL"
Figure 7-1 Installed SINUMERIK I/O in the hardware catalog
Configuring I/O
7.2 Installing general station description files for SINUMERIK I/O
SINUMERIK STEP 7 Toolbox V15.1
Configuration Manual, 12/2018, A5E46279635B AA 151

Siemens MCP 398C Specifications

General

Brand	Siemens
Model	MCP 398C
Category	Control Systems
Language	English