9.4 Enable project languages
If a multilingual project is created, all project languages, the editing language and reference
language must be specified in the settings under "Languages and Resources".
These settings should be made at an early stage because, for example, when copying or
inserting
multilingual objects, only those languages defined as project languages are included.
If a project language is disabled, all text and graphic objects previously created in this language
are deleted from the current project.
Procedure
1. Double click "Project languages" below "Languages & Resources" in the project navigation.
All selectable project languages are displayed in the working area.
2. Activate the check boxes of all languages and language variants that are to be available as
project languages.
3. Specify the reference and editing languages in the relevant drop-down lists.
Importing user alarms
9.4 Enable project languages
SINUMERIK STEP 7 Toolbox V15.1
Configuration Manual, 12/2018, A5E46279635B AA 167
To Next Page
Loading...
Need help?
General
