4.7 Copying blocks from one project into another
Procedure
Proceed as follows to import blocks from an existing project:
1. From the "View" menu, choose the command "Reference projects".
The "Reference projects" palette is displayed under the project tree.
2. Click the "Open reference project" icon in the "Reference projects" palette, select the
project, and confirm with "Open".
The
project is opened (write-protected) and the associated project structure is displayed in
the "Reference projects" palette.
Programming the PLC
4.7 Copying blocks from one project into another
SINUMERIK STEP 7 Toolbox V15.1
Configuration Manual, 12/2018, A5E46279635B AA 79
To Next Page
Loading...
Need help?
General
