3.4 Establish the communication connection
Procedure
To establish a communication connection between two devices, proceed as follows:
1. In the "Online" menu, select the "Accessible devices" command.
2. In the drop-down lists "Type of PG/PC interface" and "PG/PC interface", search for the
interface used.
If no devices are accessible at an interface, the connecting line between the PG/PC and the
device is interrupted. If devices are accessible, the connecting line is shown and the devices
accessible at the selected interface of the PG/PC are displayed in a list.
Configuring the NCU
3.4 Establish the communication connection
SINUMERIK STEP 7 Toolbox V15.1
Configuration Manual, 12/2018, A5E46279635B AA 37
To Next Page
Loading...
Need help?
General
