Siemens RM400 C Series User Manual

Software 7
U24802-J-Z146-2-7600 RM400 C Models 99
Dokuschablonen Version 3.2 vom 25.10.93 © Siemens Nixdorf Informationssysteme AG 1993
Druck vom 12. 04.1999 16:17.24 Pfad: H:\Christoph\Manuale\PDF\RM\RM400C Betriebsanleitung\englisch\rm400.k07
Terminating the activation process
Once you have configured the monitor, you are prompted to enter a new system
administrator password and confirm it with Ú.
You must then re-enter the password.
A number of messages are then displayed, the screen is cleared, and the login mask
for the graphical user interface appears.
Switching between ANSI mode and graphics mode
If you wish to switch from graphics mode to ANSI mode (alphanumeric display),
enter the key combination [ALT] [Sys-Rq] and [H].
To return to graphics mode, enter the key combination [ALT] [Sys-Rq] and [F1].
Please set your System-Administrator password now
New password:
Re-enter new password:

Siemens RM400 C Series Specifications

General

Brand	Siemens
Model	RM400 C Series
Category	Industrial Equipment
Language	English