Examples
13.2 Requirements
FM 352 electronic cam controller
152 Operating Instructions, 05/2011, A5E01071724-03
13.2 Requirements
Overview
The following requirements must be met:
● You have installed and wired an S7 station, consisting of a power supply module, a CPU
and an FM 352 module (version ≥V5). The characteristics of earlier module versions may
deviate from the description.
● STEP 7 and the FM 352 configuration package are properly installed on your PG/PC. The
handling instructions are based on STEP 7 V5.0. The procedure may differ for other
versions.
● The PG is connected to the CPU.
You can operate an FM 352 using these example projects. All examples can also be
executed on an FM 352 in a distributed configuration. To use the "MultiModules" example,
you require 2 modules.
To Next Page
Loading...
