FM 352 electronic cam controller
Operating Instructions, 05/2011, A5E01071724-03
7
Preface
1
Purpose of the manual
This manual gives you a complete overview of the FM 352 function module. It helps you
during installation and commissioning. The procedures involved in installation, wiring,
parameter assignment, and programming are described.
This manual is intended for the programmers of STEP 7 programs and for those responsible
for configuring, commissioning, and servicing automation systems.
Basic knowledge required
This manual presumes general knowledge in the field of automation engineering.
In addition, you should know how to use computers or devices with similar functions (e.g.,
programming devices) under the Microsoft
®
Windows
®
operating systems and have a
knowledge of STEP 7 programming.
Scope of the manual
This manual contains the description of the FM 352 electronic cam controller as valid at the
time it was published. We reserve the right to publish modifications of FM 352 functionality in
a separate Product Information.
The manual with the number in the footer applies to the FM 352 with order number
EWA 4NEB 720 6004–01 6ES7 352-1AH00-0AE0
EWA 4NEB 720 6004–01 a 6ES7 352-1AH01-0AE0
C79000–G7000–C352–03 6ES7 352-1AH01-0AE0
A5E01071724-01 6ES7 352-1AH01-0AE0
A5E01071724-02 6ES7 352-1AH02-0AE0
A5E01071719-03 6ES7 352-1AH02-0AE0
Content of this manual
This manual describes the hardware and software of the FM 352 electronic cam controller.
It comprises the following sections:
● Fundamentals part (Chapters 1 to 8)
● Reference part (Chapters 9 to 13)
● Appendices (A, B, C, and D)
● Index
To Next Page
Loading...
