Data blocks / error lists
C.3 Data and Structure of the Diagnostic DB
FM 352 electronic cam controller
188 Operating Instructions, 05/2011, A5E01071724-03
Structure of the Diagnostic Entry
The diagnostic entry DIAG[n] is structured as follows:
Table C- 2 Structure of the diagnostic entry DIAG[n]
Address Name Type Start value Comment
+0.0 STATE BOOL FALSE 0 = outgoing event
1 = incoming event
+0.1 INTF BOOL FALSE 1 = Internal error
+0.2 EXTF BOOL FALSE 1 = external error
+2.0 FCL INT 0 Error class:
1: Operating error
4: Data error
5: Machine data error
7: Cam data error
15: Messages
128: Diagnostic errors
+4.0 FNO INT 0 Error numbers 0 to 255
+6.0 CH_NO INT 0 Channel number (always 1)
+8.0 CAMNO INT 0 Cam numbers 0 to 127 with error class = cam data
error
List of JOB_ERR messages
JOB_ERR
(hex)
JOB_ERR
(dec)
JOB_ERR
(int)
Meaning
80A0 32928 -32608 Negative acknowledgment when reading from module.
Module removed during read operation or module defective.
80A1 32929 -32607 Negative acknowledgment when writing to module. Module
removed during write operation or module defective.
80A2 32930 -32606 Protocol error on Layer 2 (data transfer interrupted within
PROFINET / PROFIBUS DP, for example, due to wire break,
missing connector, parameter assignment error, etc.)
80A3 32931 -32605 Protocol error at user interface/user (data transfer interrupted
within PROFINET / PROFIBUS DP, for example, due to wire
break, missing connector, parameter assignment error, etc.)
80A4 32932 -32604 Communication problem on K bus
80B1 32945 -32591 Specified length wrong. Faulty FM_TYPE parameter setting at
the channel DB for the module in use.
80B2 32946 -32590 The configured slot is empty.
80B3 32947 -32589 Actual module type does not match configured module type.
80C0 32960 -32576 The module has not yet prepared the data to be read.
80C1 32961 -32575 The data of a write job of the same type have not yet been
processed on the module.
80C2 32962 -32574 The module is currently processing the maximum number of
jobs.
80C3 32963 -32573 Required resources (memory etc.) currently in use.
To Next Page
Loading...
